Narrative:

After replacing the landing gear accessory unit, I could not find a removal/installation/operations check procedure in the maintenance manual. I examined the aircraft schematic manual and operations checked the related system, ie, landing gear warning and position, etc. I've witnessed lead mechanics change this component in the past and performed the same chkout. The unit fixed the anti-ice problem I was working on. I'm not sure what the exact chkout procedures for the unit entail. I've checked the unit out to the best of my knowledge.

Google
 

Original NASA ASRS Text

Title: B727-200 HAD THE LNDG GEAR ACCESSORY UNIT REPLACED, BUT NO MAINT MANUAL PROC PUBLISHED FOR TEST OF ALL SYS INVOLVED WITH THE UNIT.

Narrative: AFTER REPLACING THE LNDG GEAR ACCESSORY UNIT, I COULD NOT FIND A REMOVAL/INSTALLATION/OPS CHK PROC IN THE MAINT MANUAL. I EXAMINED THE ACFT SCHEMATIC MANUAL AND OPS CHKED THE RELATED SYS, IE, LNDG GEAR WARNING AND POS, ETC. I'VE WITNESSED LEAD MECHS CHANGE THIS COMPONENT IN THE PAST AND PERFORMED THE SAME CHKOUT. THE UNIT FIXED THE ANTI-ICE PROB I WAS WORKING ON. I'M NOT SURE WHAT THE EXACT CHKOUT PROCS FOR THE UNIT ENTAIL. I'VE CHKED THE UNIT OUT TO THE BEST OF MY KNOWLEDGE.

Data retrieved from NASA's ASRS site as of July 2007 and automatically converted to unabbreviated mixed upper/lowercase text. This report is for informational purposes with no guarantee of accuracy. See NASA's ASRS site for official report.